Articles fréquemment consultés
SoM-Module with AMD Zynq 7020-1C, 1 GByte DDR3L, 32 MByte Flash, 4,5 x 6,5 cm (TE0716-01-61C32-A)
SoM with AMD Zynq 7000 SoC XC7Z020, 1 GByte DDR3L-1600 SDRAM, 32 MByte SPI Flash memory, Gigabit Ethernet PHY, USB PHY, USB2.0 to UART/JTAG
Référence de l’article: VAR-827003689
Numéro de produit du fabricant: TE0716-01-61C32-A
Code douane: 84718000
Article situé / expédié de : Riedlingen, Allemagne
The Trenz Electronic TE0716 is a commercial-grade* SoM (System on Module) based on AMD Zynq 7000 SoC XC7Z020*, with 1 GByte of DDR3L-1600 SDRAM*, 32 MByte of SPI Flash memory, 10 x 12-Bit Low Power SAR ADCs, 512 Kb serial EEPROM, Gigabit Ethernet PHY transceiver, an USB PHY transceiver, a single chip USB2.0 to UART/JTAG interface (AMD license included), and powerful switching-mode power supplies for all on-board voltages. A large number of configurable I/Os are provided via rugged high-speed board-to-board connectors.
All parts are at least commercial temperature range of 0C to +70C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
- SoC/FPGA
- Package: CLG484
- Device: AMD Z-7020
- Speed: -1 *
- Temperature: C grade *.
- RAM/Storage
- Low Power DDR3 SDRAM on PS
- Data width: 32bit
- Size: def. 1GB *
- Speed: 1600 Mbps **
- QSPI boot Flash
- Data width: 4bit
- Size: 32MB *
- MAC address serial EEPROM with EUI-48 node identity
- 512Kb user MAC address serial EEPROM.
- Low Power DDR3 SDRAM on PS
- On Board
- 10x 12-Bit Low Power SAR ADCs up to 2 MSPS
- Low Power Oscillators.
- Gigabit Ethernet PHY transceiver
- High-Speed USB 2.0 ULPI transceiver with full OTG support
- Single chip High-Speed USB 2.0 to UART/JTAG Interface (AMD License included) (FTDI FT2232H).
- 2 x User RGB LEDs (Green), LED FPGA "Done" (Green).
- 2 x Tactile Switches (User), 1 x Tactile Switche (Reset).
- Interface
- 120 x HR PL I/Os (3 banks).
- 2 x PS MIOs (shared with UART TX/RX ZYNQ-FTDI).
- 1 Gbps RGMII Ethernet interface.
- High Speed USB 2.0 ULPI with full OTG support.
- High Speed USB 2.0 to UART/JTAG interface, including microUSB-B connector.
- microSD
- JTAG
- Power
- On-board high-efficiency DC-DC converters for all voltages used.
- Dimension
- 45 x 65 mm
- Notes
- * depends on assembly version
- ** depends on used Zynq and DDR3 combination
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado Standard Edition (free version)
The Vivado StandardEdition is the FREE version of the Vivado design suite.VivadoStandard delivers instant access to some basic Vivado features and functionality at no cost.
Overview Vivado Standard and Enterprise EditionScope of Delivery
- 1 x TE0716-01-61C32-A SoM with AMD Zynq 7000 SoC XC7Z020
Additional Information
- Manufacturer's article number: TE0716-01-61C32-A
- Trenz Electronic TE0716 Wiki
- Support Forum
- ON Semiconductor Motor Development Kit
All modules produced by Trenz Electronicare developed and manufactured in Germany.
| Caractéristique technique | Valeur |
|---|---|
| ID de l’art. | 103203 |
| État | |
| ID de l'ancien article | 01968567a97b7279988e6197b5fa371d |
| Modèle | TE0716-01-61C32-A |
| Fabricant | |
| Pays de fabrication | Allemagne |
| Contenu | 1 pièce |
| Poids | 93 g |
