The Trenz Electronic TE0630 is an industrial-grade FPGA micromodule integrating a AMD Spartan 6 FPGA, a mini-USB 2.0 device port,4 GBit (512MByte) DDR3L SDRAM with 16-Bit width, 8 MByte Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's are provided via rugged high-speed stacking connectors. The TE0630 is fully mechanically and largely electrically backward compatible with Trenz Electronic TE0300 AMD Spartan 3E FPGA micromodules.

Key Features

• SoC / FPGA
  • Device: AMD Spartan 6 XC6SLX45-2CSG484I
  • Speedgrade: -2
  • Temperature range: industrial-grade
  • Package: CSG484

• RAM / Storage
  • 16-Bit breiter4 GBit (512MByte) DDR3L SDRAM
  • 64 Mbit (8 Mbyte) QSPI Flash memory (for configuration and operation) accessible through:
    • FPGA
    • JTAG port (SPI indirekt)
    • USB

• On Board
  • 24 MHz and 100 MHz reference clock signals
  • eFUSE bit-stream encryption (LX75 or larger)
  • 4user LEDs
  • 1 user push-button
  • 2 user DIP switches

• Interface
  • Plug-on module with 2 80 pin stacking connectors
  • Up to 40 differential and up to 109 single-ended FPGA I/O's pins available on B2B connectors
  • FPGA configuration through:
    • B2B connector
    • JTAG port
    • SPI Flash memory

• Power
  • 1.2 V, 1.5 V, 2.5 V = VCCAUX and 3.3 V power rails

• Dimension
  • 4x5 cm

Product specification

• AMD Spartan 6 LX FPGA: XC6SLX45-2CSG484I = 43 k logic cells, industrial grade
• Cypress CY7C68013A-56LFXC EZ-USB FX2LP: USB microcontroller, high speed USB peripheral controller
• 16-Bit-wide (data-bus)4 Gigabit (512 Megabyte) DDR3L SDRAM
• 64 MBit (8 MByte) serial Flash memory with dual/quad QSPI interface
• 2 x fine-pitch (0.5 mm) 80-pin board-to-board connectors Hirose DF17 series
• Up to 40 differential FPGA input/output pins available on B2B connectors
• Up to 109 single-ended FPGA input/output pins available on B2B connectors
• USB and JTAG pins available on B2B connectors
• 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2 V
• 3.0 A high-efficiency DC-DC switching regulator for power rail 1.5 V
• 0.8 A DC-DC linear regulator for power rails 2.5 V and VCCAUX
• 3.0 A high-efficiency DC-DC switching regulator for power rail 3.3 V
• Power supervisory circuits with power-fail
• Power supply voltage range: 4.0 to 5.5 V
• Power supply source: USB port, board-to-board interconnect (e.g. carrier board)
• Dimensions: 47.5 40.5 mm (19.2 cm²)
• Minimum height: TBD (without connectors)
• Minimum height on carrier board: TBD
• Weight: 14.0 to 14.5 g
• Temperature grades
  • commercial (C-type FPGA device)
  • industrial (I-type FPGA device)
    
    

Scope of Delivery

• 1 xTE0630-03-52I22-A Trenz Electronic FPGAmodule with AMD Spartan 6 LX45FPGA

Additional Information

• Manufacturer'sarticle number: TE0630-03-52I22-A
• TrenzElectronicTE0630Wiki
• Support Forum