FPGA module with GateMate A1 from Cologne Chip, 16 MByte QSPI Flash, 4 x 5 cm (TEG2000-01-A1I-1A)
Cologne Chip GateMate CCGM1A1 FPGA, 16 MByte Quad SPI flash, 2 x 100 pin B2B connector, 25 MHz Clock Oscillator, One SerDes lane, 118 Total I/O
Ceres::Template.singleItemTechnicalDataAttribute | Ceres::Template.singleItemTechnicalDataValue |
---|---|
ID articolo | 102983 |
Condizione | |
Modello | TEG2000-01-A1I-1A |
Produttore | |
Paese di produzione | |
Numero della tariffa doganale | 84718000 |
Numero di variazione (MEPA): VAR-827003469
Codice produttore: TEG2000-01-A1I-1A
Codice doganale: 84718000
Articolo situato in e spedito da: Riedlingen, Germania
The Trenz Electronic TEG2000-01-A1I-1A is a powerful 4 x5 cmFPGA modulewith the cost-effective GateMate A1 form Cologne Chip AG. The moduleis equipped16 MByte QSPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.
The module sets a new standard for low-cost programmable logic devices, providing an affordable yet powerful solution for diverse applications. Trenz Electronic can manufacture and assembly different variants in-house.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
Key Features
- FPGA
- Device: Cologne Chip GateMate CCGM1A1 FPGA
- Performance mode: economy (VDD @ 1.0V)
- Temperature range: industrial (-20C to 85C)
- RAM / Storage
- 16 MByte (128 Mbit) Quad-SPI Flash memory
- On Board
- 25 MHz Clock Oscillator
- LEDs (two status LEDs and one user LED)
- Level Shifters
- Interface
- Plug-on-Modulwith 2 x 100-PinRazor Beam B2B connector
- Configuration via Flash on board, USB or JTAG
- 5 Gb/s SerDes Interface
- Diverse I/O-and LVDS configurations:
- 5 banks with 18 I/Os or 9 LVDS pairs each
- 1 bank (NB) with 12 I/Os or 6 LVDS pairs
- 1 bank (NA) with 14 I/Os or 6 LVDS pairs
- 1 bank (SB) with 6 I/Os @ 1.8V and 8 I/Os level shifted @ 3.3V
- Power
- Supply voltages: either 3.3V or 3.3V and 5V
- On-board high-efficiency DC-DC converters:
- 3 A x 1.0 V power rail
- 3 A x 1.8 V power rail
- 4 A x 3.3 V power rail
- Dimension
- 4 x 5 cm
- 4 x 5 cm
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Open-Source Design Flow
Aligned with Trenz Electronic's commitment to open-source, the FPGA Module supports an open-source design flow. This empowers users to customize and optimize their designs for maximum efficiency and innovation.
Scope of Delivery
- 1 x TEG2000-01-A1I-1A Trenz Electronic MPSoC module with Cologne Chip GateMate CCGM1A1 FPGA
- 8 x screws
- 4 x bolts
Additional Information
- Manufacturer's article number: TEG2000-01-A1I-1A
- HomepageCologne Chip AG
- Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, regular 4 mm,
overview, compatibility, mating heights and speed rating: Wiki, mounted on every 4 x 5 cm module of Trenz Electronic - Cologne article name information
- Support Forum
All modules produced by Trenz Electronicare developed and manufactured in Germany.
Ceres::Template.singleItemTechnicalDataAttribute | Ceres::Template.singleItemTechnicalDataValue |
---|---|
ID articolo | 102983 |
Condizione | |
ID della variazione | 01979ce89349714b89410054539b6e22 |
Modello | TEG2000-01-A1I-1A |
Produttore | |
Paese di produzione | |
Contenuto | 1 undefined |
Peso | 81 g |