Customers frequently viewed
FPGA Module with AMD Artix 7A100T-2C, 1 GByte DDR3L, 4 x 5 cm, low profile (TE0712-03-72C36-L)
AMD Artix 7 XC7A100T-2FGG484C, 2.5 mm Samtec LSHM connectors, Speedgrade 2, 1 GByte DDR3 SDRAM, 32 MByte QSPI Flash, 100 Mbit Ethernet PHY, 4 MGTs, size: 4 x 5 cm
Item number VAR-827003447
Manufacturer Product Number: TE0712-03-72C36-L
Taric/custom code: 84718000
Item located in and dispatched from: Riedlingen, Germany
Please ask for any minimum quantities.
The predecessor of this article is TE0712-02-72C36-L. All changes are in the Product Change Notification (PCN).
This module is identical to variant TE0712-03-72C36-A except the lower 2.5 mm Samtec connectors.
The Trenz Electronic TE0712-03-72C36-L is an industrial-grade FPGA module integrating a AMD Artix 7 100T FPGA, 1 GByte of DDR3 SDRAM, 32 MByte Flash memory for configuration and operation, a 10/100 Mbit Ethernet transceiver, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
All parts are at least commercial temperature range of 0C to +70C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
- AMD Artix 7 XC7A100T-2FGG484C
- Rugged for high shock resistance and high vibration
- 32 MByte (256 Mbit)Quad-SPI Flash memory
- 4 GTP (high-performance transceiver) lanes
- GTP (high-performance transceiver) clock input
- 1 GByte (32-bit) DDR3 SDRAM
- 10/100 Mbit Ethernet PHY in RMII Mode
- MAC address EEPROM
- Programmable Low Jitter PLL (Silicon Labs Si5338)
- On-board high-efficiency DC-DC converters
- 12 A x 1.0V power rail
- 1.5 A x 1.8V power rail
- 1.5 A x 1.5V power rail
- Supply voltages: either 3.3V or 3.3V and 5V
- Plug-on module with 2 x 100-pin and1 x60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (low profile 2.5 mm)
- 158 FPGA I/O's (78 differential pairs) available on board-to-board connectors
- System management and power sequencing
- eFUSE bit-stream encryption
- AES bit-stream encryption
- Two User configurable LEDs
- Evenly spread supply pins for good signal integrity
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado Standard Edition (free version)
The Vivado StandardEdition is the FREE version of the Vivado design suite.VivadoStandard delivers instant access to some basic Vivado features and functionality at no cost.
Overview Vivado Standard and Enterprise EditionDevelopment Support
There are different base boards available for this module.
Latest documentation, design support files and reference designs with source files are available for download free of charge.
Scope of Delivery
- 1 x TE0712-03-72C36-L Trenz Electronic 4 x 5 cm FPGA module with AMD Artix 7 100T, low profile
- as shown, without spacer bolts and screws -
Additional Information
- Manufacturer's article number: TE0712-03-72C36-L
- Trenz Electronic TE0712 Wiki
- Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, low profile 2.5 mm,
information concerning mating heights: Wiki, mounted on every 4 x 5 cm module from us marked with"LP" or "low profile". - Support Forum
All modules produced by Trenz Electronicare developed and manufactured in Germany.
The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.
| Technical characteristic | Value |
|---|---|
| Item ID | 102961 |
| Condition | New |
| Legacy item ID | 01968567929473459fe97c481f0856f1 |
| Model | TE0712-03-72C36-L |
| Manufacturer | |
| Manufacturing country | Germany |
| Content | 1 piece |
| Weight | 84 g |
| Customs tariff number | 84718000 |
