Trenz Electronic GmbH
FMC Card with four SFP+ 10 Gbit ports (TEF0008-03-D)
For use on an FMC HPC carrier and not suitable for stand-alone operation.
Numero di variazione (MEPA): VAR-827003441
Codice produttore: TEF0008-03-D
Codice doganale: 84718000
Il prodotto viene spedito da Riedlingen, Germania.
The predecessorof this article is TEF0008-02-D.
The Trenz Electronic TEF0008 is a FPGA to Mezzanine Card (FMC) based on VITA 57.1 FMC HPC Standard, with four SFP+ 10 Gbit ports for fiber optical SFP modules. It is inteded for use on a FMC HPC carrier and can not be used stand-alone.
The front panel is only offered as an additional accessory (Trenzarticle Nr. 34034).
Mounting holes near the front pannel are not implemented due to physical restrictions caused by the SFP cage. The dimensions exceed in some area the by Vita 57.1 standard defined dimensions. In the middle region of the card the cage is higher than the specified max high for this area. Check carefully if the carrier card uses this space for other components conflicting mechanical.The bottom side is at the high limit.
All parts are at least industrial temperature range of -40C to +85C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
- Four SFP+ 10 Gbit ports
- HPC FMC connector
- Low jitter programmable clock generator
- AlteraMAX 10 FPGA10M08SAU169I7G
- 3.3 V to 1.8 V DC/DC converter
- 32Kbit EEPROM
- Status LED (green)
- Dimension: 69 x 84 mm, SFP+ connector excluded (+ 5.5 mm)
- Highest part on PCB top is 9.5 mm (SFP+ cage, excluded front plate),bottom 1.4 mm (MAX10 FPGA)
Other assembly options for cost or performance optimization plus high volume prices available on request.
Scope of Delivery
- 1 x TEF0008-03-D Trenz Electronic FMC card
Additional Information
- Manufacturer's article number: TEF0008-03-D
- Trenz Electronic TEF0008 Wiki
- Support Forum
All modules produced by Trenz Electronicare developed and manufactured in Germany.
