This product is not always in stock, but will be produced on customer order (on demand).
Please ask for any minimum quantities.

The predecessor of this article is TE0600-03-83I21-A. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0600-04-83I21-Ais anindustrial FPGA micromodule integrating a AMD Spartan 6 LX150 FPGA, Gigabit Ethernet transceiver (physical layer), two independent banks of 16-bit-wide 512MByte DDR3 SDRAM, 16MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via robust board-to-board (B2B) connectors.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least industrial temperature range of -40C to +85C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

AMD Spartan 6 XC6SLX150-3FGG484I FPGA
10/100/1000 tri-speed Gigabit Ethernet transceiver (PHY)
2 x4 Gbit (512 MByte) DDR3LSDRAM
128 Mbit (16 MByte) serial Flash memorywith dual/quad SPI-Interface (for configuration and operation), accessible through:
- 1 kb protected 1-Wire EEPROM with SHA-1 Engine
JTAG port (SPI indirect)
FPGA configuration through:
- B2B connector
- JTAG port
- SPI Flash memory
Plug-on module with 2 100-pin high-speed hermaphroditic strips
Up to 52 differential, up to 109 single-ended (+ 1 dual-purpose) FPGA I/O pins available on B2B strips
6.0 A x 1.2 V power rail
3.0 A x 1.5 V power rail
2x 1A x 2.5V power rail
125MHz reference clock signal
Single-ended custom oscillator (option)
eFUSE bit-stream encryption (LX100 or larger)
1 user LED
Evenly-spread supply pins for good signal integrity
Size: 4 x 5 cm

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

for Trenz Electronicmodules with Spartan 6LX100/LX150

ISE Design Suite (purchase of a software license is necessary)

ISE design suite supports the Spartan 6, Virtex-6, and CoolRunner devices, as well as their previous generation families. ISE design suite runs on Windows XP/7/Server and Linux operating systems. Additionally, ISE supports Spartan 6 devices on Windows 10.

Download and further information:

https://www.xilinx.com/products/design-tools/ise-design-suite.html

Development Support

There is a base board available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Applications

Industrial networks
Vehicle networking and connectivity
High-resolution videos and graphics

Scope of Delivery

1 x TE0600-04-83I21-A Trenz Electronic GigaBee module withAMD Spartan 6 FPGA
8 x screws
4 x bolts

Additional Information

Manufacturer's article number: TE0600-04-83I21-A
Trenz Electronic TE0600 Wiki
Support Forum

All modules produced by Trenz Electronicare developed and manufactured in Germany.

Die Darstellung des Produktes stellt kein rechtlich bindendes Angebot, sondern ein Symbolbild zur Veranschaulichung des Angebots dar.

Technical characteristic	Value
Item ID	103003
Condition	New
Legacy item ID	0196862f255073038a8142e3012be025
Model	TE0600-04-83I21-A
Manufacturer
Manufacturing country	Germany
Content	1 piece
Weight	97 g
Customs tariff number	84718000

GigaBee with AMD Spartan 6 LX150-3I, 2 x 512 MByte DDR3L, 4 x 5 cm (TE0600-04-83I21-A)